Guitar + MBass - Noise Gate

1

Guitar + MB2 + MOTU mk3 Ultralite using 1/4 Guitar Jacks.
the poly tuner spinning round round right round like a record.
There is some signal noise(?) below -39db coming through and not sure why.
This is not happening with MG2 in the same project.
What are some things to check?
The MB Noise Gates have no effect.

MB2_NoiseGate
MB2_NoiseGate978×703 106 KB

cbb_MB2_MG2_NoiseGate
cbb_MB2_MG2_NoiseGate1920×1350 221 KB

THIS NOISE GATE WORKED
cbb_MB2_MG2_NoiseGateSonitis

Found a cool visual analyzer

MG3b_Noise
MG3b_Noise1920×1147 119 KB

2

Hmmm, What interface are you using to get your guitar signal into the DAW?

3

MOTU mk3 Ultralite. Thanks for asking, I updated the OP.

4

I asked because I noticed your tuner showing a tone between Bb/B and this is the tone I’ve had trouble with when using the SY-1000 over USB but not specifically with MG2/3.

1 Like