Hi Yervil, this method doesn’t help or change tracking at all. The Helix has an 8 channel USB audio interface built in. One channel is an unaffected(same as guitar input) signal over USB channel 7(re-amp). For me, that is my audio input channel for MG2. I then send the audio output from MG2 to USB audio channels 3/4 into a separate path in my Helix(which is configurable in Helix). That gives me a separate path that I can add effects, adjust tone & volume, turn on/off, etc. Its also sends midi over USB so that sends, PC messages, sustain & expression(from a MIDI Baby pedal that plugs into the MIDI in(5-pin DIN)) on my Helix . I could also send the midi from the MIDI Baby over USB, but I’ve had some issues once I introduce a MIDI hub into that part of the system. Hope that explanation helps.!
Bottom path in attached image is for synth.
IMG_3535|690x458
